Item name: automatic cleaning and oil change machine for automobile automatic transmission
Origin: China - Zhuhai
Brand: Zhuhai hawk (ZHZY)
Date of production: 2017-07-01
I. overview
The automatic transmission is used for a long time, and the internal transmission oil will deteriorate. If the automatic transmission oil is not changed in time, the gearbox will work abnormally. Only a simple replacement of transmission oil, but also the need to automatically disassemble multiple parts of the gearbox, and a long time of natural oil discharge, so as to maximize the discharge of old oil, this way time-consuming. In the past, automatic transmission oil replacement machines were generally unable to control the amount of transmission oil as required. Sometimes the gearbox was damaged because of excessive or insufficient filling. This machine can complete the cleaning, the hydraulic torque converter, the transmission box radiator cleaning and the oil change in 20 minutes, the oil change rate is close to 100%.
It is simple and convenient to use. When the utility model is operated, only the quick connector is selected, and the oil change machine is automatically connected with the automatic transmission box, so that the cleaning and the oil change can be carried out.
Two, equipment function and use characteristics
3.1 automatically identify the flow direction between the transmission and the radiator line. There is no need to distinguish the return pipe.
3.2 LCD display, user-friendly operation, convenient and practical.
3.3 automatic transmission oil filler function.
3.4 automatic identification of positive and negative power supply.
3.5 automatic transmission cycle cleaning function.
3.6 automatic change of new and old oil in transmission.
3.7 transmission radiator oil pressure and equipment oil pressure visual display.
3.8, intelligent electronic control, new and old oil automatic equivalent exchange.
3.9, set the old and new oil exchange at will
More than 3.10 kinds of special joints, applicable to Europe, America, Asia, countries, models.
3.11 effectively solve the problem of manual replacement of transmission oil.
3.12 improve the performance of the transmission.
3.13 extend the service life of the transmission.
Three, equipment technical parameters and work environment requirements
Technical parameter:
4.1 voltage: DC12V
4.2 maximum power: 150W
4.3 pressure gauge: 0~150psi
4.4 tubing: 2.5m
4.5 return tubing: 2.5m
4.6 row tubing: 1.5m
4.7 filter accuracy: 5 m
4.8 fuel tank: 20L * 2
4.9 equal replacement error: + 100ml
4.10 maximum replacement speed: 2L/MIN
4.11 noise: <70db
4.12 net weight: 64 Kg
4.13 size: 530mm * 560mm * 1030mm
work environment
4.14 environmental temperature: -10 to +40 degrees C
4.15 relative humidity: < 85%
4.16 level of work site requirement
Four 、 equipment composition and work connection form
5.1 external structure and take over (see Figure two)
5.2 operation panel function details (see Figure three)
Six, each function operation instruction
Operation notes
L equipment is not connected with the car, the use of "equipment replacement and filling" is strictly prohibited;
L in the device row of oil pipe valve is not open, strictly prohibit the operation of "equipment emptying old and new oil" function;
L in the operation of the equipment, no automatic oil or cleaning agent is added from the filling port;
When the l equipment is stored, the old and new tanks are not allowed to contain oil. The old oil should be transferred to other containers immediately after completion of the equipment so as to avoid affecting the accuracy of the replacement of the equipment;
L equipment should be put in horizontal position to prevent the oil pump from cleaning the oil in the tank;
In case of emergency, the l equipment shall avoid flameout and restart the engine in the course of exchanging the transmission oil in equal quantity. To prevent the engine from starting, the voltage fluctuates too much, affecting equal precision;
L cars need to be monitored during the oil change process;
6.1. preparation before operation
6.11 lift cart
Secure the car reliably. Leave the drive wheel suspended for at least 200mm. The parking brake. The wheel stopper is added to the non driven wheel before and after reliable braking;
6.12 connecting pipe
L6.12.01 find the connection tubing between the transmission and the radiator and select an easy open one;
L 6.12.02 from the junction box to find and disassemble the pipe, easy to connect the joint and the oil pipe at both ends of the connection;
The L 6.12.03 connects the tubing on the device to the connections on both ends of the transmission tubing (without regard to flow)
6.13 connection power supply
Clamp the power cord onto the two poles of the car battery (DC12V, which automatically identifies the polarity);
6.14 check confirm
Start the engine to make sure the pipe is reliable and leak free. You can enter the device startup process;
6.2. device startup process
Turn on the machine power switch. The screen shows the following interface (see Figure four)
6.3. function operation
The main menu appears, press the cursor keys to increase or decrease in the function of operation. Press OK again to enter the interface you need to run. The following is a detailed description of the equipment function menu.
6.3.1 replace the automatic transmission oil
Important note:
L6.3.1.01 when the equipment is placed for a long time without changing or replacing other brands of automatic transmission oil, it is necessary to add about 1 liters of new oil in the equipment. Clean the equipment line with the "emptying equipment, new tank" function;
L 6.3.1.02 to make the automatic transmission oil change thoroughly, in the operation of new oil amount and set the amount of oil than the automatic gearbox rated oil amount of 2 liters;
L 6.3.1.03 automatic transmission, after cleaning, must change oil, and oil change must be more than 2 liters of rated oil, to ensure complete oil change, reduce residual cleaning agent on the seal damage;
In the process of l6.3.1.04 replacement, different gears should be switched, depending on the situation, each shift will stay for about one minute. When working in high gear, throttle the vehicle speed of 60 km / hour, can replace the automatic transmission control circuit of high-speed gear oil;
The new l6.3.1.04 not to join the new transmission oil tank again in the replacement function, if transmission oil in the operation, will enable the equipment caused by the unequal! If you really need to add new oil, then need the replacement is completed;
Setting oil change interface
Fill in the new oil and set the oil change as required on this interface;
Important note:
L when the equipment is placed for a long time without changing or replacing other brands of automatic transmission oil, it is necessary to add about 1 liters of new oil in the equipment. Clean the equipment line with the "emptying equipment, new tank" function;
L to make the automatic transmission oil change thoroughly, in the operation of new oil amount and set the amount of oil than the automatic gearbox rated oil amount of 2 liters;
L automatic transmission, after cleaning, must change oil, and oil change must be more than 2 liters of rated oil, to ensure complete oil change, reduce residual cleaning agent on the seal damage;
In the process of L replacement, different gears should be switched, depending on the situation, each shift will stay for about one minute. When working in high gear, throttle the vehicle speed of 60 km / hour, can replace the automatic transmission control circuit of high-speed gear oil;
The new L not to join the new transmission oil tank again in the replacement function, if transmission oil in the operation, will enable the equipment caused by the unequal! If you really need to add new oil, then need the replacement is completed;
Setting oil change interface
Fill in the new oil and set the oil change as required on this interface;
Important note
L confirm that the pipe is connected;
L set oil change shall not be greater than the amount of new oil added, otherwise
The machine does not work;
L must start the engine before pressing the OK key;
The above is part of the operation of the machine. After the purchase, we will attach the product manual, product warranty certificate.
Ujfj
Instructions for the safe use of equipment
The machine can be operated only after reading and understanding the following rules
1.1. smoking is prohibited near the machine and sparks are carried out to avoid fire and explosion;
1.2. strictly prohibit flammable, explosive and other articles and fire sources approaching equipment;
1.3 use the equipment in a well ventilated room. Avoid direct sunlight to cause aging of rubber products.
1.4 to avoid automatic transmission oil splash, disconnect the oil pipe connections, use a towel to cover the joint.
1.5, flip device is strictly prohibited.
1.6 the quality of the automatic transmission oil must comply with the requirements of the operating vehicle maintenance manual. Otherwise, the manufacturer will not be responsible for any damage to the machine.
1.7 after closing the operation, the equipment power shall be switched off.
1.8, in order to avoid the equipment oil pipe is rotated parts of winding, in use process should keep away from automobile rotating parts and heating parts, such as fan, radiator and so on.